Coherent underwater communication using passive time reversal over multipath channels

Passive time reversal exploits underwater acoustic channels’ spatial and temporal diversity. It can refocus multipath propagated signal at the receiver and can be realized simply by the passive phase conjugation (PPC) method. By the temporal focusing, time delay spread caused by multipath propagation is mitigated for spectral efficient coherent communications. However, the PPC method is unable to eliminate multipath and is limited by channel variations. An adaptive equalizer is therefore needed to compensate residual multipath after refocusing and to track channel temporal variations. Spatial diversity is obtained by using a vertical receiving array. In this paper we used 4-hydrophone array and demonstrated that the adaptive decision feedback equalization in conjunction with PPC significantly decreased the bit error rate.     

The characteristics of acoustic line array prototypes for scale model experiments

The sound fields created by three different settings of a 5 m long linear loudspeaker array were studied experimentally in the present investigation in an attempt to find out a method to produce a reasonable sound field for scaled down model experiments. The first setting was with all the loudspeakers facing vertically upward, while the second setting was with all the loudspeakers facing the horizontal. The last one resembled the first setting but the loudspeakers were put inside a small partial enclosure whose opening was facing vertically upward. Results show that the last setting can produce a sound field with characteristics close to those of a two-dimensional sound field. The second setting results in a sound directivity pattern relevant to that of the measured A-weighted traffic noise.     

Space averaging of vibration level differences measured in lightweight building structures

This paper examines space averaging methods applied to structural level differences measured in lightweight building structures (two beam junction and single plate and beam junction). The methods studied include the averaging assuming a constant input force, the averaging based on a constant vibration level across the source element, and the arithmetic averaging of level differences. Tests indicate that a fairly steady input force can be easily produced when using an impulsive source such as a hammer; the constant input force method is then appropriate and can be used to space average level differences (the two beam structure showing a standard deviation of 0.1 dB from the averaging based on levels normalised to the force). On the other hand, acceleration levels can exhibit significant variations with position due to the low mode count and modal overlap of some lightweight elements such as timber beams. Variations in the vibration level across the source element can then be responsible for large inaccuracies in the level difference calculated from the constant level assumption, the two beams’ results showing errors greater than 5 dB at several 1/3 octave band frequencies. The latter averaging method is then inappropriate and should not be used.     

船用超声液位传感器的分析与设计

介绍了一种船用某型超声液位传感器的基本结构和工作原理。在对脉冲式超声探头的轴向声压分布特点及其声透射强度分析研究的基础上,给出了该传感器的超声信号发射端与接收端之间距离d和压电晶片保护膜的壁厚δ值的确定方法。最后设计了一套超声液位传感器性能测试实验平台,对上述理论研究结论进行了实验验证。     

柱状分层固体媒质的声散射

本文评述了各向同性和横向各向同性柱状分层固体声散射理论和实验研究进展 ,介绍了描述圆柱状界面薄层特性的弹簧模型 ,也讨论了该领域中有待进一步研究的一些问题。     

Sound transmission from stiffened double laminated composite plates

An analytical model is developed to investigate the sound transmission loss from orthogonally rib-stiffened double laminated composite plates structure under a plane sound wave excitation, in which first order shear deformation theory is presented for laminated composite plates. By using the space harmonic approach and virtual work principle, the sound transmission loss is described analytically. The validity and feasibility of the model are verified by comparing the present theoretical predictions with numerical results published previously. The influences of structure geometrical parameters on sound transmission loss are subsequently presented. Through numerical results, it can be concluded that the proposed analytical model is accurate and simple in solving the vibroacoustic behavior of an orthogonally rib-stiffened double laminated composite plates.     

结合区域提取和改进卷积神经网络的水下小目标检测

针对水下小目标信息量有限而难以提取有效特征导致的检测性能不佳问题,提出了一种结合区域提取和融合Hu矩特征的改进卷积神经网络水下小目标检测方法。该方法包含区域提取和分类两个步骤。首先以马尔可夫随机场分割算法为基础进行区域提取,对潜在目标定位的同时降低伪目标对后续分类的干扰;然后提取潜在目标区域的Hu矩特征并融入卷积神经网络,形成一种形状特征表征能力更强的改进卷积神经网络用于分类。声呐实测数据处理结果表明,该方法可以有效提升对水下小目标的发现概率和正确报警率,与其他目标检测方法相比,该方法具有更好的检测性能和泛化性。     

Manipulation with sound and vibration: A review on the micromanipulation system based on sub-MHz acoustic waves

Manipulation of micro-objects have been playing an essential role in biochemical analysis or clinical diagnostics. Among the diverse technologies for micromanipulation, acoustic methods show the advantages of good biocompatibility, wide tunability, a label-free and contactless manner. Thus, acoustic micromanipulations have been widely exploited in micro-analysis systems. In this article, we reviewed the acoustic micromanipulation systems that were actuated by sub-MHz acoustic waves. In contrast to the high-frequency range, the acoustic microsystems operating at sub-MHz acoustic frequency are more accessible, whose acoustic sources are at low cost and even available from daily acoustic devices (e.g. buzzers, speakers, piezoelectric plates). The broad availability, with the addition of the advantages of acoustic micromanipulation, make sub-MHz microsystems promising for a variety of biomedical applications. Here, we review recent progresses in sub-MHz acoustic micromanipulation technologies, focusing on their applications in biomedical fields. These technologies are based on the basic acoustic phenomenon, such as cavitation, acoustic radiation force, and acoustic streaming. And categorized by their applications, we introduce these systems for mixing, pumping and droplet generation, separation and enrichment, patterning, rotation, propulsion and actuation. The diverse applications of these systems hold great promise for a wide range of enhancements in biomedicines and attract increasing interest for further investigation.     

Performance analysis and design of quasi-cyclic LDPC codes for underwater magnetic induction communications

Magnetic induction (MI) communication is an effective scheme for underwater wireless communication. In this paper, we aim to design an underwater MI communication system based on Quasi-cyclic LDPC (QC-LDPC) codes. Firstly, for a given QC-LDPC code used in underwater MI communication, we propose a novel algorithm to evaluate its performance, which is named as underwater magnetic induction protograph (UWMIP) extrinsic information transfer algorithm. Furthermore, we present a differential evolution UWMIP (DE-UWMIP) algorithm, which incorporates the differential evolution method and the UWMIP algorithm. By this algorithm, we search the optimized QC-LDPC codes with best distance threshold. Simulation results show that the proposed algorithm is effective and provide a good guidance to design the underwater MI communication system.     

Channel temporal correlation-based optimization method for imperfect underwater acoustic channel state information

The rapid time variations and large channel estimation errors in underwater acoustic (UWA) channels mean that transmitters for adaptive resource allocation quickly become outdated and provide inaccurate channel state information (CSI). This results in poor resource allocation efficiency. To address this issue, this paper proposes an optimization approach for imperfect CSI based on a Gauss–Markov model and the per-subcarrier channel temporal correlation (PSCTC) factor. The proposed scheme is applicable to downlink UWA orthogonal frequency division multiple access systems. The proposed PSCTC factors are measured, and their long-term stability is verified using data recorded in real-world sea tests. Simulation and experimental results show that the optimized CSI effectively mitigates the effects of the temporal variability of UWA channels. It demonstrates that the resource allocation scheme using optimized CSI achieves a higher effective throughput and a lower bit error rate than both imperfect CSI and the CSI predicted by the recursive least-squares (RLS) algorithm.